− 13 −
B
B
Mark the centers of the remaining
installation holes (x 2), at the
distances from the installation
holes marked in
❹
specified in the
installation dimensions on pg. 2.
Dimension B
H02
､
H04 : 310mm
H07 : 360mm
H15 : 430mm
H22 : 470mm
The centers of the installation
holes marked in
❹
and
❺
can
also be marked without doing
any measuring, by drilling the
holes marked in
❶
,
❷
and
❸
,
loosely anchoring the Mistresa
and then tracing the holes.
However, move the Mistresa out
of the way to drill the φ10 holes.
Open the holes around the marks,
with a hole saw, etc.
Air intake port (Center)
H02, H04: φ105 mm
H07: φ130 mm
H15: φ160 mm
H22: φ210 mm
Drain pipes: φ30 mm
(Same for all models)
Installation holes: φ10 mm
(Same for all models)
Set the Mistresa in place and lock
it down with the nuts and bolts.
5
6
7
Installation
hole center
Installation
hole center
marked in
❹
Installation
hole center
marked in
❹
Summary of Contents for Mistresa CRH Series
