Showa Denki Mistresa CRH Series, Operation Manual

Page: 12 / 48

− 10 −
9. Product installation
(1) Installation method
CAUTION
Common to all models:
・
Before opening the package, make sure it is right side up.
・
Check the weight of the Mistresa before lifting it and use the right sling
for the rated work load.
・
Confirm that the hanger bolts are not loose.
・
Hook the lifting hooks on the hanger bolts to lift the Mistresa.
・
Do not suddenly move the Mistresa up or down, or suddenly start or
stop lifting in any way that shocks the Mistresa.
・
Do not hold the Mistresa by the terminal box when transporting it.
・
After installing the Mistresa on the machine, do not lift the Mistresa
together with the machine using the hanger bolts.
・
When lifting a Mistresa of the CRM-S series (horizontal type), use the
eye bolts located on the top of the Mistresa.
・
When lifting the CRM-V series (vertical type), replace the bolts at the
top of the Mistresa with the eye bolts included in the product package.
・
Replace the diagonally opposite bolts on the top of the Mistresa with
the eye bolts.
①
CRM-S Series, CRMH-S Series, CRH Series
ａ
Install in a horizontal (level) manner to evenly distribute the weight of
the drain pipe discharge and the anti-vibration pads.
ｂ
When installing the product
on top of another machine,
etc., secure it with bolts to
prevent shifting due to
vibration.
ｃ
Leave a gap at the securing
bolts to allow the anti-
vibration pads to function
properly
(See Fig.1).
Fig.1
As viewed from "A"
2 to 3mm
Double nut
Gap
Anti-vibration pad
Welded bolt