− 23 −
Front demister
After inspecting and removing the front demister/filters
Front demister (x 1): Install a new demister with the short side in the
vertical direction. (The demister can face either direction.)
Front filters (x 4): Stack all 4 new filters neatly and install them with the
short side in the vertical direction and "Mistresa Genuine Part" and the
stamp facing downwind.
4
Front filter
【
NOTE S and V models
】
5
【
NOTE V models
】
6
To reattach the cover, fit the
cover guides in the guide holes.
An improperly attached cover
may cause oil to leak.
When inspecting or replacing the demister or filters, check for cutting
chips in the drain pipe. If detected, remove the chips by hand or using
a rod of no more than φ8 mm in diameter. Clogging may prevent oil
from draining properly.
Drain pipe
Summary of Contents for Mistresa CRH Series
