End-filter replacement
(These filters can be reused after being washed)
Remove the eye nut.
Take out the end filter and
replace it.
7
8
CAUTION
Use only filters which are genuine SHOWA parts, and never operate the
Mistresa with the filters removed. Doing so could cause abnormal
operation and product failure.
(4) Other maintenance items
Since the CRH-
□□
E Series Mistresa use a quasi-explosion-proof motor,
contact us for maintenance other than replacing the filters. (See page
32.)
(5) Filter washing procedure
①
Washing method
F
ilters and demisters which have
a "washable" status can be
cleaned by air-blowing them, or
by soaking them with a neutral
detergent until clean.
②
Disposal method
After filter washing is completed, the waste water and filter waste
material must be discarded in accordance with the local waste water
and waste material disposal regulations.
Filter
Demister
− 30 −
Summary of Contents for Mistresa CRH Series
