manualshive.com logo in svg

Shop fox W1702, Manual

Share
Download
Shop fox W1702 Manual Download Page 68

-47-

J_Xg\i8ZZ\jjfi`\j

The following shaper accessories may be available through your local Woodstock International Inc. Dealer. 
If you do not have a dealer in your area, these products are also available through online dealers. Please 
call or e-mail Woodstock International Inc. Customer Service to get a current listing of dealers at: 1-800 
840-8420 or at [email protected].

K_\N((', Nff[jkfZb9fXi[9l[[`\j

ž

 

 hold down the workpiece on 

the shaper during cutting operations. These Board Buddies

®

 are made 

from die-cast aluminum and feature non-marring green neoprene 
rubber wheels. Because the wheels turn in both directions, they 
function as hold-downs rather than anti-kickback devices. Mounts to 
fences 3" to 3-1/2" high x 1" or wider with the optional W1107 12" 
Tracks or the W1108 24" Tracks.

K_\ N(,''

E:AB 8AJ

ž

 I`^_k 8e^c\ A`^

 allows you to make cuts 

on board ends and various other cuts with complete accuracy and 
improved safety. Constructed using top quality aluminum castings 
and plates which are machined to exacting tolerances. It has the 
perfect weight-use ratio to dampen vibration, yet is still light enough 
to easily slide the workpiece through the shaping process. Its quality 
and precision are evident from the first cut.  

K_\;*'0-

E:AB8AJ

ž=\Xk_\i9fXi[

 reduces the risk of kickback 

and helps achieve consistent shaping results from your shaper. 
Designed to lock into 3/8" x 3/4" miter gauge slots, these 

E:AB8AJ

® 

Featherboards are adjustable for various stock widths and miter slot 
locations. No drilling or bulky “C” clamp arrangements needed.

K_\ ;)',.

E:AB 8AJ

ž

 8[aljkXYc\ DfY`c\ 9Xj\

 supports your 

shaper so you can move it easily and lock it in position. Designed for 
long term and frequent moving of heavy machinery. All 

E:AB8AJ

® 

Adjustable Mobile Bases are the first mobile bases designed strong 
enough to move heavy machines on a continual basis. The stands are 
adjustable to fit a variety of machines, and can be leveled without 
the use of shims or tools.

G8IKJ

K_\

E:AB8AJ

ž

?\Xmp$;lkpIfcc\iJkXe[jXe[Ifcc\iKXYc\j

 make 

your shaper safer and easier to use. All models feature convenient hand 
knobs for fast height adjustment and offer rigid steel construction. 
These stands are invaluable for supporting work on shapers. Go to 

_kkg1&&nnn%j_fg]fo%Y`q&ifcc\ijkXe[%Z]d

 to view all of the available 

roller tables and stands.

Summary of Contents for W1702












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands