![Shop fox W1702 Manual Download Page 44](http://html.mh-extra.com/html/shop-fox/w1702/w1702_manual_1259153044.webp)
-23-
:lkk\i;`i\Zk`fe
The Model W1702 is capable of operating in two
directions by use of a forward and reverse switch
as shown in
=`^li\*)%
It is very important that
the workpiece be fed against the direction of
the cutter rotation. This will prevent a climb
cut and maintains a safe cutting procedure for
the operator. There will be times when it is
necessary to flip the shaper cutter over and run
it in the opposite direction, and feed the board
from the opposite end of the shaper.
When the switch is pointing to the
=N;
position, the spindle and cutter rotate
counter-clockwise.
When pointing to the
I<M
position, the
spindle and cutter rotate clockwise.
When the forward and reverse switch is
pointing to the
F==
position, the shaper
motor has no power, but power is still
going to the switch.
8CN8PJ LEGCL>
the
power cord from the shaper to the power
source before changing cutters or doing an
adjustment or maintenance.
Always try to operate the shaper so the wood
is cut from the underside. Topside cutting is
more dangerous for the operator, because when
the wood is cut on the top side, the cutter can
lift and grab the wood and cause severe injury!
Refer to
IlY :fccXij
on
gX^\ )0
, for specific
recommendations.
NOTICE
8cnXpjZ_\Zbk_\[`i\Zk`fef]k_\Zlkk\i_\X[
Y\]fi\g\i]fid`e^Xj_Xg\ifg\iXk`fe%
8CN8PJ ]\\[ k_\ nfibg`\Z\ X^X`ejk k_\
[`i\Zk`fe k_\ Zlkk\ij Xi\ klie`e^% @] pfl
]\\[k_\nfibg`\Z\`ek_\jXd\[`i\Zk`feXj
k_\Zlkk\iifkXk`fe#XZc`dYZlkn`cci\jlck#
n_`Z_dXp^iXYXe[glcck_\nfibg`\Z\Xe[
pfli_Xe[k_ifl^_k_\j_Xg`e^fg\iXk`feXk
X_`^_iXk\f]jg\\[ZXlj`e^j\m\i\`ealip
=`^li\*)%
Forward and reverse switch.
FG<I8K@FEJ
FECP
fg\iXk\ pfli j_Xg\i `e k_\
:FLEK<I$
:CF:BN@J<
[`i\Zk`fe Xj cffb`e^ [fnenXi[
Xk k_\ jg`e[c\ n_\e pfl lj\ X iflk\i Y`k
X[Xgk\i% Iflk\i Y`kj Xi\ [\j`^e\[ kf Zlk
`e X Zflek\i$ZcfZbn`j\ [`i\Zk`fe fecp%
;F
EFK
fg\iXk\ k_\ j_Xg\i `e k_\ ZcfZbn`j\
[`i\Zk`fe kf dXb\ Xep jfik f] iflk\i$Y`k
YXZb Zlk% @] k_`j nXie`e^ `j `^efi\[# k_\
nfibg`\Z\ ZXe b`Zb YXZb# k_\ Zfcc\k ZXe
cffj\e Xe[ k_ifn k_\ Zlkk\i# Xe[ ZXlj\
j\m\i\`ealipfi[\Xk_
Summary of Contents for W1702
