manualshive.com logo in svg

Shop fox W1702, Manual

Share
Download
Shop fox W1702 Manual Download Page 3

-3-

Model W1702 Manual Insert (Mfd. Since 8/10)

Model W1702 Machine Specifications, Page 2 of 3

Main Specifications

Operation Info

Max. Cutter Height........................................................................................ 2 in.

Max. Cutter Diameter............................................................................... 5‐1/2 in.

Spindle Sizes................................................................................... 1/2, 3/4, 1 in.

Spindle Lengths........................................................................... 2‐3/4, 3‐1/2, 3 in.

Exposed Spindle Length............................................................................. 3‐1/8 in.

Spindle Cap. Under the Nut............................................................. 2, 2‐1/2, 2‐1/4 in.

Spindle Speeds............................................................................. 7000, 10,000 RPM

Spindle Travel.............................................................................................. 3 in.

Spindle Openings................................................................. 1‐3/8, 2‐3/4, 4, 5‐1/2 in.

Table Info

Number of Table Inserts...................................................................................... 3

Table Insert Sizes I.D........................................................... 1‐1/2, 2‐15/16, 5‐3/16 in.

Table Insert Sizes O.D....................................................................... 1‐7/8, 5‐1/8 in.

Table Counterbore Diameter............................................................................ 7 in.

Table Counterbore Depth............................................................................. 5/8 in.

Table Size Length................................................................................... 28‐1/4 in.

Table Size With Ext. Wing Length................................................................ 28‐1/4 in.

Table Size Width.................................................................................... 21‐3/4 in.

Table Size With Ext Wing Width.................................................................. 30‐1/2 in.

Table Size Thickness................................................................................. 1‐1/2 in.

Table Size With Ext. Wing Thickness.............................................................. 1‐1/2 in.

Floor to Table Height.................................................................................... 34 in.

Table Fence Length.............................................................................. 26‐15/16 in.

Table Fence Width..................................................................................... 5/8 in.

Table Fence Height.................................................................................. 2‐3/4 in.

Miter Gauge Info

Miter Angle.................................................................................... 0 – 60 deg. L/R

Miter Gauge Slot Type........................................................................... Straight Slot

Miter Gauge Slot Width................................................................................ 3/4 in.

Miter Gauge Slot Height............................................................................... 3/8 in.

Construction

Table............................................................................. Precision‐Ground Cast Iron

Body Assembly........................................................................................ Cast Iron

Cabinet........................................................................................... Formed Steel

Fence..................................................................................... Cast Iron with Wood

Miter Gauge........................................................................................... Cast Iron

Guard................................................................................................... Cast Iron

Spindle Bearings...................................................................... Shielded & Lubricated

Paint Type/Finish............................................................................. Powder Coated

Other

Number of Dust Ports......................................................................................... 1

Dust Port Size.............................................................................................. 3 in.

Mobile Base............................................................................................. D2057A

Summary of Contents for W1702












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands