Shop fox W1702, Manual

Page: 6 / 75

-6-
Model W1702 Manual Insert (Mfd. Since 8/10)
New Machine Inventory (Figure ??) Qty
• Front Safety Shield ........................................1
• Clear Guard .................................................1
• Knob Bolt
1
⁄
4
"-20 x
1
⁄
2
" ....................................2
• Flat Washer
1
⁄
4
" ............................................4
Figure 4. New machine inventory items.
Front Safety Shield
Certain freehand shaping procedures require you to
attach a safety shield to the guard assembly as shown in
Figure 14.
To install front safety shield, do these steps:
1. Remove (2)
1
⁄
4
"-20 x
3
⁄
8
" flat head screws and (2)
1
⁄
4
"-20
hex nuts connecting extension bar to safety guard (see
Figure 6 ).
2. Align mounting holes of clear guard with holes in
extension bar, and secure with hardware from Step 1.
3. Attach safety shield to safety guard using (2)
1
⁄
4
"-20 x
1
⁄
2
" knob bolts, and (2)
1
⁄
4
" flat washers (see Figure 6 ).
Note: To adjust safety shield height, loosen both knob
bolts, raise or lower safety shield, and re-tighten knob
bolts to secure setting.
Safety
Shield
x 2
Figure 6. Safety shield and clear guard
installed.
Safety
Guard
x 2
Clear
Guard
Extension Bar