Shop fox W1702, Manual

Page: 33 / 75

"&'"
8JJ<D9CP
=\eZ\=XZ`e^
Fence facing can be custom made for special
needs—for example, mounting a hold-down
roller systems like the
E:AB 8AJ
® Model
W1105 Green BOARD BUDDIES ® .
Kf`ejkXcck_\]\eZ\]XZ`e^#[fk_\j\jk\gj1
(% Using 1 ⁄
4
"-20 x 5 ⁄
8
" Countersunk Phillips ® head
screws, 1 ⁄
4
" washers, and 1 ⁄
4
"-20 T-nuts;
install each fence facing to the fence mount
brackets as shown in
=`^li\()%
)% For custom fence facing, make sure the screw
heads are countersunk completely below the
surface of the fence face.
Always use a safety guard whenever possible.
The safety guard improve shaping safety.
Kf`ejkXcck_\jX]\kp^lXi[#[fk_\j\jk\gj1
(% Connect the extension bar to the safety
guard with two
1
⁄
4
"-20 x
3
⁄
8
" bolts and the
1 ⁄
4
" hex nuts.
)% Thread the support into the main fence
housing. See
=`^li\(*%
*%
Position the extension bar and safety guard
on the main fence housing and install the
T-lock handle. See =`^li\(*%
=`^li\()% Installing fence facing.
JX]\kp>lXi[
=`^li\(*% Threading lock handle onto the
guard assembly.
<ok\ej`fe
9Xi
DX`e
=\eZ\
?flj`e^
K$cfZb
?Xe[c\
K$elk
Jlggfik
JX]\kp
>lXi[
=`^li\(+%
Auxiliary wooden guards.
Auxiliary Wooden Guard
Guard Assembly
#10 Wood Screws
8lo`c`Xip>lXi[
Certain freehand shaping procedures require
you to attach auxiliary wooden guards to the
safety guard assembly as shown in
=`^li\(+ .
KfdXb\Xe[`ejkXccXlo`c`Xipnff[\e^lXi[j#
[fk_\j\jk\gj1
(% From 1 ⁄
2
" wood stock, measure and cut one
front wooden guard at 6" long, and two side
guards at 2
1 ⁄
2
" long.
NOTE: Guard height depends on the thickness
of the material you are shaping. If using a
template attached to the workpiece, be sure
to include template height for the overall
height.
)% Secure the auxiliary wooden guards to the
lip of the guard assembly with six #10 wood
screws.