manualshive.com logo in svg

Shop fox W1702, Manual

Share
Download
Shop fox W1702 Manual Download Page 55

D8@EK<E8E:<

-34-

:cfjli\

The following pages contain parts diagrams/lists 
and a warranty card for your 

E:AB 8AJ

®

  

Model W1702 3HP Shaper.

If you need parts or help in assembling your 
machine, or if you need operational information, 
we encourage you to call our Service Department. 
Our trained service technicians will be glad to 
help you.

If you have comments dealing specifically with 
this manual, please write to us using the address 
in the General Information. The specifications, 
drawings, and photographs illustrated in this 
manual represent the Model W1702 3 HP Shaper 
as supplied when the manual was prepared. 
However, due to Woodstock International, Inc.’s 
policy of continuous improvement, changes may 
be made at any time with no obligation on the 
part of Woodstock International, Inc. Whenever 
possible, though, we send manual updates to all 
owners of a particular tool or machine that have 
registered their purchase with our warranty 
card. Should you receive an update, add the 
new information to this manual and keep it for 
reference.

We have included some important safety 
measures that are essential to this machine’s 
operation. While most safety measures are 
generally universal, we remind you that each 
workshop is different and safety rules should 
be considered as they apply to your specific 
situation.

We recommend you keep this manual for 
complete information regarding Woodstock 
International, Inc.’s warranty and return policy.  
Should a problem arise, we recommend that you 
keep your proof of purchase with your manual. 
If you need additional technical information 
relating to this machine, or if you need general 
assistance or replacement parts, please contact 
the Service Department at 1-360-734-3482 or 
[email protected].

Additional information sources are necessary to 
realize the full potential of this machine. Trade 
journals, woodworking magazines, and your 
local library are good places to start. 

The Model W1702 3 HP Shaper is specifically 
designed for shaping operations. 

;FEFKDF;@=P

8E;&FI LJ< K?@J D8:?@E< =FI 8EP FK?<I
GLIGFJ<%

 

DF;@=@:8K@FEJ FI @DGIFG<I LJ<

F= K?@J KFFC N@CC MF@; K?< N8II8EKP%

If you are confused about any aspect of this 
machine, 

;FEFK

 use it until all your questions 

have been answered.

Summary of Contents for W1702












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands