Shining 3D Transcan-C_User Manual_V1.4.2
48
Exact Movement Menu
Enter the value in mm and degrees, click
Apply
to match the data origin to the input coordinate and
orientation
The arrows represent the global coordinate system, Red=X+, Green=Y+, Blue=Z+
Click
Reset
to cancel the transformation to original position
Click
OK
to confirm the transformation.
Tips:
Start from data reposition (offset to 0,0,0)
Edit rotations prior to transformation
Change the view normal to a reference plane to change the corresponding angle
3-2-1 Movement
Prior to 3-2-1 movement, the creation of a plane, line not normal to the plane and point are required.
3-2-1 movement (plane-line-point alignment) aligns the data by deletion of the Degrees of Freedom.
The arrows represent the global coordinate system, Red=X+, Green=Y+, Blue=Z+
