Shining 3D Transcan-C_User Manual_V1.4.2
46
Open file.
Click
Open file
, a STL or OBJ file can be imported to edit.
7.3.1.
Create Feature
Enter/Exit the Feature menu.
Click the Feature button to display the menu, click again to close the menu.
Feature menu
Display of Features
Click on the corresponding icon to create points, lines, planes.
Then select the creation method and follow the instructions, click “Create” to generate, or “Close” to
cancel and close the window.
The features created displaying in gray, the selected features are in red. In the feature list, click
“delete button” to remove (Delete action cannot undo).
Feature
Creation
method
Requirement
Description
Point
Selected
Points
Click on the data to select a point
Click create to create a point
Line-Plane
Interface
Line and Plane
should be
created in
advanced
Click on the created line, or select it on the
drop-down list.
Click on the created plane, or select it on the
drop-down list.
The point generated is the intersection between
the non-parallel line and plane
Feature creation failed! Error code 9
: the line is
parallel to the plane