Shining 3D Transcan-C_User Manual_V1.4.2
47
Line
Point-Point
Pick 2 points.
Click on the data to select a point or click on a
feature point previously created
In the Choice list select one of the points to redo it
The line generated is defined as a connection
between point to point
Plane-Plane
Intersection
2 Planes should
be created in
advanced
Click on the plane previously created, or
select it on the drop-down list, repeat for the
second plane.
The created line is the intersection between
the 2 non-parallel planes
Feature creation failed! Error code 1
: the planes
are parallel
Plane
3 Points Fit
The plane is generated by 3 points not
co-linear.
Click on the data to select one point or click
on a previous created feature point.
In the Choice list select one of the points to
reselect it
Feature creation failed! Error code 6=
the points
selected are co-linear
Point-Line Fit
Line should be
created in
advanced
The plane generated includes the point and
the line (The line should be created in
advanced)
Click on the line previously created, or select
it from the drop-down
Click on the data to select a point or click on a
feature point previously created
In the Choice list select one of the elements
to reselect it
Feature creation failed! Error code 6=
the point
selected belongs to the line
Best Fit
Press Shift+ LMB to select an area, press ctrl +
LMB to unselect.
The plane generated is the position with the
smallest deviation from the selected area
Recommend method to create plane
7.3.2.
Align
Use this mode to modify the alignment of the data to the global coordinate. This action is useful for
post processing or reverse engineering.
The transformations do not affect the shape and size. Once you align to the new position and exit the
alignment interface, the previous position can only be restored by reloading the file.
Enter/Exit the Movement menu.
Click the Movement button to display the menu, click again to close the menu.
Exact movement
