Shining 3D Transcan-C_User Manual_V1.4.2
28
Markers Alignment and Global Markers Alignment
Markers alignment is used when the scanner cannot see enough coded targets on the turntable for
auto alignment. Markers alignment works in a similar way as turntable coded target alignment; the
software matches 2 neighboring scans by recognizing at least 4 common markers.
Global Markers is accessible if a Global Marker File has been loaded during the project creation.
5.3.
Scan
5.3.1.
Scanning Button
Click the button or press
Space key to start scanning.
When the scan is completed, the data is automatically saved in the project file. Make sure the relative
position does not change during the scan.
When auto scan mode is scanning, you can click the button to stop the current scan. The
current data will be deleted directly.
Scan interface
5.3.2.
Edit Scanning Data
SHIFT + Left mouse
: Select unwanted points, the selected points will turn red, as shown below.
Ctrl + Left mouse
: Deselect selected data.
