Aoralscan 3_Manual_V1.0.0.30 - 5 -
⚫
Installation, use, and operation of the scanner are subject to the law in the jurisdictions
in which it is used. Install, use, and operate the scanner only in such ways that do not conflict with
applicable laws or regulations, which have the force of law. Use of the scanner for purposes other
than those intended and expressly stated here, as well as incorrect use or operation, may relieve
us or our agents from all or some responsibilities for resultant noncompliance, damage, or injury.
⚫
The users of this scanner and software are responsible for image quality and diagnosis.
They should ensure that the inspection data is being used for the analysis and diagnosis only, and
furthermore the data is sufficient both spatially and temporally for the measurement approach
being used.
⚫
The images acquired by the scanner must be interpreted by a qualified medical
professional. The software in no way interprets these images or provides a medical diagnosis of
the patient being examined.
Contraindications
No known contraindications.
Warnings
Before using the Aoralscan 3,
read these warnings and Safety information on chapter 2.
⚫
Do not attempt to disassemble, repair, or modify the scanner and software.
⚫
There are no user serviceable parts inside the scanner. Necessary modifications must be
made only by the manufacturer or its designated agents.
⚫
Do not allow foreign objects (including all types of liquids) to enter the scanner and its
pedestal. Water, moisture, etc. may cause a short circuit in the electronic components and lead
to malfunction.
⚫
If the scanner head is accidentally dropped to the ground, check to make sure the lens
is not loose before using it.
⚫
If the scanner is inadvertently dropped on the ground or impacted, it must be calibrated
before use. If there are still accuracy problems or scanning abnormalities after calibration, please
consult technical support.
⚫
Do not drop or apply shock/vibration to this scanner and its pedestal. Strong impacts
may damage the components inside.
⚫
Do not cut, bend, modify, place heavy objects, or step on the cables. Otherwise, the
external insulation may be damaged and result in short- circuit or fire.
