Shining 3D Aoralscan 3 Manual Download Page 33

Page: 33 / 58

Aoralscan 3_Manual_V1.0.0.30 - 27 -

Scanner connection cable

2.0

Software Overview

The

Aoralscan 3

is designed to operate with the software programs, which include four

modules:

⚫

Calibration module

Calibrate the scanner.

⚫

Dental order system module

Designed to manage and store patient data, including cases, prescriptions, and restoration

information, realizing functions such as order creation, editing, searching, scanning and deletion,

as well as uploading, downloading, previewing and tracking of scanned order and data.

⚫

Scan module

The interface guides you through the entire scanning process of acquiring intraoral digital

images with the scanner.

⚫

Pre-design module

Mainly for the user to be more convenient to use in the design software, can realize

coordinate adjustment, mark tooth position, extraction edge line and other functions.

4.3.1.

System requirements

Before installing and running the supplied software programs, your computer shall meet the

following requirements:

CPU

Intel Core i7-8700 or higher

Memory

16 GB or higher

Hard disk drive

256 GB SSD or above

Graphic card (GPU)

NVIDIA RTX 2060 6GB or higher

Operating system

Windows 10 Professional (64-bit) or later versions of Windows
operating system

Display Resolution

1920X1080, 60Hz or higher

I/O ports

More than 2 type-A USB 3.0 (or higher) ports

WARNING

Summary of Contents for Aoralscan 3



























































Search results

Summary of Contents for Aoralscan 3

Reviews:

Related manuals for Aoralscan 3

Brands by name

Popular brands

Shining 3D Aoralscan 3, Manual

Search results

Summary of Contents for Aoralscan 3

Reviews:

Related manuals for Aoralscan 3

Brands by name

Popular brands