Aoralscan 3_Manual_V1.0.0.30 - 1 -
1.
Read This First
The Manual provides important procedures and information on how to operate the scanner
and configure the IntraoralScan software correctly and safely. Before attempting to operate the
product, read the Manual and strictly observe all warnings and cautions. Pay extra attention to
the information from Safety information in chapter 2.
Basic Information
A. Product name, model
Product name: IntraoralScan
Model: Aoralscan 3
Name, residence, contact information and after-sales service of the registrant or the filer:
Registrant's name: SHINING 3D Tech Co., Ltd.
After-sales service provider: SHINING 3D Tech Co., Ltd.
Name, residence, contact information and after-sales service of the manufacturer
Manufacturer name: SHINING 3D Tech Co., Ltd.
Production Address: No. 1398, Xiangbin Road, Wenyan, Xiaoshan, Hangzhou, Zhejiang, China,
311258
Product performance, main structural composition
Product performance
- Appearance and structure
The appearance should be smooth, no cracks, no stains, no obvious deformation, flexible and
reliable operating mechanism.
- Function control and display
Function control: After pressing the scanning button, determine whether the front end of the
scanner flashes normally.
Display: Under normal working conditions, when the scanner is opened for scanning, the two-
dimensional and three-dimensional imaging of the scanned object (such as teeth) can be seen on
the display respectively.
3D image processing: After the 3D stereo image is generated, the 3D image can be cropped
