Shini SCD-160Ux2/200H, Manual

Page: 34 / 62

34(62)
4.14 Drying System Operation
4.14.1 Control Panel
Picture 4-15: Control panel
4.14.2 Operation Step
1) Open the main power switch of control box.
2) Press
“ RUN/STOP ” key, start drying process at first, the state indicator is
green
；
3) Press “ RUN/STOP ” key once again, stop drying process, the state
indicator is yellow.
4.14.3 Temperature Setting
1) After pressing “ SET ” key, the figure flicks, meanwhile press “ ” to add
or decrease temperature value.
2) After temperature setting, then press “ set ” key again to confirm the input
value.
4.14.4 Temperature Lock Setting
1) After pressing the “ Menu ” key for 2 secs, it displays “ TIME ” .
2) Repeat to press “ ” Key, till it displays “ LOCK ”
；
3) Press ” SET ” key, the letter flickers, at this time press “ ” or “ ” to select
“ YES ” (lock temp. value) or “ No ” (Not lock).
4) Press “ set ” key, and confirm the value.
5) Press “ menu ” key, it returns operation screen.