Shini SCAD-12U, Manual

Page: 39 / 44

39(44)
4.2.9 Wrong Codes Remark
Table 4-2
：
Wrong Codes remark (SCAD-12U and Models Above)
Wrong
Codes
Remark
E-01 Thermocouple break
E-02 Inverse phase
E-03 Heater overload
E-04 Overheat input for drying EGO
E-05 Drying temperature is higher than the max.
setting temperature of the system
E-07 Overheat protection
（
when PV
≥
SV +set value,
it alarms.
）
E-08 Memory errors
E-09 Honeycomb rotor operation error
E-10 Overheat input for regenerative EGO
E-11 Reversed-phase of thermocouple
E-12 Auto-tuning errors