29(44)
4. Application and Operation
Picture 4-1
：
Operation Panel (SCAD-6U and Models Below)
4.1 Temp. Setup (SCAD-6U and Models Below)
4.1.1 The Instruction for the Key Operation
1) The Selection Key for the Parameter Interface
1. In usual status, press this key to enter the parameter interface
selection mode and also you can select the parameter interface by
pressing that key. Press
key if you want to enter parameter
mode.
2. Press selection key when in parameter mode to jump out the
parameter mode and enter into parameter interface selection mode.
3. In the setup mode, press selection key to store parameter and jump
out the setup mode. You can enter into setup mode to set the
parameter.
4. In all the modes, press
for 2 seconds to jump back usual status.
2) Setup Key
Summary of Contents for SCAD-12U
