Shini SCAD-12U, Manual

Page: 8 / 44

8(44)
1.1 Coding Principle
1.2 Feature
1) Standard configuration
●
P.I.D. temperature controller can reach the accuracy of
±
1
℃
, The weekly
timer is available with SCAD-12U~40U.
●
Adopts compressed air to dry plastic materials with good and stable drying
effect, and is not influenced by ambient temperature and humidity.
●
SCAD-1~6U double-layer thermos table glass tube is easy to observe
material level.
●
Storage hopper of SCAD-12~40U is made of stainless steel to ensure no
material contamination.
●
Function of compressed air pressure detection makes a safe and reliable
operation.
●
Voltage-ouput type temperature controller collocating with SSR control loop
can effectively prolong the lifespan of device.
●
Equipped with overheat protection to avoid excessively high drying
temperature.
●
Equipped with air outlet filter, which is used to filter dried air exhausted to
outside.
●
Warning light can monitor machine normal operation.
2) Accessory option
●
Optionally equipped with heatless regenerative air dryer, the dew-point
temperature can reach -40
℃
below. It mainly used to dry hygroscopic
engineering plastics, and its power consumption is 35% lower than
honeycomb dehumidifier.