27
4
. Menu Item Selection
2
4
1
3
5
6
7
11
13
12
8
9
10
14
4.5.3
Menu Lock
In the UP Series, menu settings can be locked to prevent any accident or erroneous menu changes. This
feature is called "Menu lock".
Menu Lock can be activated or released only at the “oFF” display immediately after the balance is
connected to the power.
(How to lock the menu)
1
Disconnect power from the balance once. Then,
reconnect power to the balance.
2
Press and hold down the [CAL] key for about
three seconds during “oFF” display.
“LoCKEd” is briefly displayed to indicate that the
menu is locked.
Notes
•
is illuminated during “oFF” display or STAND-BY while Menu Lock
is activated.
• “LoCKEd” is displayed upon an attempt of access to the menu including
releasing the currently set function, while Menu Lock is activated.
• The operational condition setting for Animal Weighing (
11.6
) and the
environmental setting for Pouring mode (
8.2
) are also locked under Menu
Lock.
• Change of minimum display (See
6.2, 11.1, 11.2
) is not locked by Menu
Lock, also change of unit display (See
3.2
) is not locked by Menu Lock.
• If the menu lock is enabled, the date and time printing when pressing and
holding the [PRINT] key for 3 seconds, and the PRINT +, DATE=, TIME=,
and TIME command operations will also be locked.
(How to remove Menu Lock)
1
Disconnect power from the balance once. Then,
reconnect power to the balance.
2
When “oFF” is displayed, press and hold down
the [CAL] key for about three seconds.
3
“rELEASE” is briefly displayed to indicate that the
menu lock has been turned off.
Summary of Contents for UP1023X
Page 3: ...No text...
Page 124: ...109 2 4 1 3 5 6 7 11 13 12 8 9 10 14 Appendices...
