Shimadzu UP1023X, Instruction Manual

Page: 26 / 125

11
2
. Installation
2
4
1
3
5
6
7
11
13
12
8
9
10
14
4
This balance has three level screws (adjustable
feet) at the right front, left front and right rear
corners.
Turning a level screw clock-wise stretches the leg
to raise the balance body there. Turning
anticlockwise withdraws the leg and lowers the
balance body.
The level indicator locates at left rear. The bubble
of it is off center when the balance is not placed
level.
(1) At first, adjust only with the two front
screws. Then, turn the right rear level screw
① anticlockwise to withdraw its leg
completely.
While adjusting level screws and observing the
bubble, gently press the left front corner of the
balance
② so that both front level screw feet ③
are touching the table surface.
(2) Bubble moves to the highest position.
Therefore, adjust level screws ③ so that the
balance main body is lowered in the direction
of the bubble.
Case 1: Right front of the balance is too high.
Turn right front level screw anti-
clockwise so that the bubble moves
towards center.
Case 2: Front of the balance is too low. Turn
both front level screws clockwise so
that the bubble moves towards center.
(3) When the bubble has come to the center of the
red circle, turn the right rear level screw
clockwise until its foot softly touches the table
surface. Verify the balance sits stable with four
feet.
83
[
J
Level indicator
Level
screw
(At the shortest
point when starting
adjustment)
Level screw
Level
screw
Left front
①
②
③
③
[Large pan model]
Case 1 Case 2
Bubble Bubble