Shimadzu UP1023X, Instruction Manual

Page: 19 / 125

4
1
. Name and Function of Components
1.3
Balance Display and Function
%NETBPTG
PCS lbGN
mg mom
kg
ctdwt
oztl
BATT
#
AP WARM-UP STAND-BY
HI
GO
LO
Analog display section Unit display section
Display Name Description
Stability mark
Indicates that the weighed value is stable. (*1) In menu item selection, this
symbol indicates currently selected item. ( * 1)
Tare symbol Indicates that a Pretare value has been set. (*3)
Weight symbol
Illuminates during span calibration.
Blinks before automatic span calibration starts.
Note: Using a verified balance as a legal measuring instrument in
using region:
When PSC fully-automatic span calibration is not activated, operator must
carry out span calibration with the built-in weight upon blinking of this symbol.
[ ] Bracket
Note: Using a verified balance as a legal measuring instrument in
using region:
The figure bordered by the bracket is the auxiliary indicating device.
Number symbol Indicates numeric value entry.
Menu symbol Illuminates during menu item selection.
*
Asterisk
Indicates that the displayed numeric value is not a mass value. ( * 2)
Communication symbol
Illuminates during communication to external equipment through the
RS-232C or DATA I/O connector.
Inverse triangle symbol
Indicates the set-up of solid specific gravity measurement. Used as a
substitution of the decimal point.
Zero symbol
Indicates the set-up of Auto Zero function.(*3)
Note: Using a verified balance as a legal measuring instrument in
using region:
Indicates that the balance is set exactly to "Zero" with the zero-setting
fu/- 0.20e: e = verification scale interval).
Animal symbol Indicates the set-up of Animal Weighing function.(*3)
Add-on symbol Indicates the set-up of Add-on mode or Formulation mode.
Memory symbol
Displays when the net total mass measurement function (memory
function) is ON.
Auto Print symbol Indicates the set-up of Auto Print function.
Stand-by symbol
Illuminates when the balance power is in the standby mode.
Also illuminates when the application function has entered the standby mode.
Response stability
setting symbol
Displays to indicate response stability setting status.
* 1 Stability mark The displayed value may change while the stability symbol remains illuminated if the load is
changing slowly or if the stability detection band has been set to a large value.
* 2 Decimal replacement If there are any decimals to the right of 7 digit numbers, this will be displayed to indicate the
presence of the decimals that are not displayed.
*
3 Not applicable to a verified balance as a legal measuring instrument in using region