![background image](http://html.mh-extra.com/html/sharp/up-5700/up-5700_service-manual_373332102.webp)
CHAPTER 8. ABOUT UTILITY
SOFTWARE AND OTHERS
Two types of UP-5700’s utility software are provided by Sharp: one is
used on UP-5700, and the other one is used on a PC (personal
computer).
1. Utility software used on UP-5700
No.
Software name
File name
1
SYSTEM INSTALLER
Sysins(in Mask ROM disk)
Outline:
System installer executes automatically on UP-5700 boot up by set-
ting system SW to boot from MROM Disk. It immediately waits for
receiving data from host, and processes install by communication
command from PC side’s installer.
Also, keyboard operations are not usually required, but by connecting
keyboard and operating as needed, communication parameters
(COM port / communication baud rate, etc) can be set up. Further-
more, after system installer is terminated, DOS command can be
executed by going back to the command prompt. Ex: When HD is
connected, execute FDisk / Format and install to HD.
Following operation can be done.
1. Install POS application and related data files to FROM Disk,
PSRAM Disk received from PC connected with RS-232.
2. Connect UP-5700 which is already installed and UP-5700 not
installed with RS-232 and copy contents of installed machine to
other machine.
3. For optional function, operation such as changing communication
configuration, modifying AUTOEXEC.BAT / CONFIG.SYS inside
FROM / PSRAM Disk can be done.
No.
Software name
File name
2
R/J LOGO IMAGE LOADING UTILITY
LogoDUP
Outline:
R/J logo loading utility reads logo image file (Monochrome BMP file)
and loads it against ER-01PU. To use this utility, POS device driver
must be installed first.
Logo image is written into Flash ROM in ER-01PU.
Loading logo image from application is needed only when changing
logo image.
Function:
Loads logo image against ER-01PU connected to UP-5700. Also, test
printing can be done.
Image file to be loaded is monochrome bitmap file.
Image data size must be smaller or equal to width 360dot(fixed)
´
height 160dot(variable)
NOTE: Only receipt side printer can print out logo data, and print out
from journal side can not be done.
No.
Software name
File name
3
TOUCH PANEL POSITION ADJUSTING
UTILITY PROGRAM
CALDSRP
Outline:
Touch panel calibration utility is used to position the bottom pressing
point of touch panel device and to align the LCDs display area.
The adjustment value returned from this utility is saved in EEPROM
inside touch panel controller. This will save the data even if the power
is shut down.
Function:
At shipment of UP-5700, the touch panel position has already ad-
justed.
To adjust it, use the touch pen of K-PDA (Keyboard enhanced Per-
sonal Digital Assistant).
PARTS CODE
PARTS NAME
MODEL
CPENP1004PCN5
Touch Pen
K-PDA ZR-xxxx series
2. Utility software used on PC (Personal
Computer)
No.
Software name
File name
1
APPLICATION INSTALL PROGRAM
(FOR MS-DOS)
APLDDOS
Outline:
POS installer is used to remotely install to FROM / PSRAM disk on
UP-5700 connected by RS-232.
Following operations can be done.
1. Remote install the POS application and related data files into
FROM Disk, PSRAM Disk on UP-5700 connected with RS-232.
2. Create an install FD to do the FD install using FD connected to
UP-5700.
3. Locally install files into FROM Disk and PSRAM Disk from HD on
UP-5700.
Notice : When installing, contents of FROM Disk and PSRAM Disk is
erased.
No.
Software name
File name
2
APPLICATION INSTALL PROGRAM
(FOR Windows95)
APLDWIN
Outline:
POS installer remotely installs POS applications and related data files
into FROM Disk / PSRAM Disk on UP-5700 connected with serial
cable.
Function:
By using POS installer, following operations can be done.
1. Remotely install POS applications and related data files into
FROM Disk / PSRAM Disk on UP-5700 connected with RS-232.
2. Browse and operate files in disk on UP-5700. ( Explorer mode )
3. Create installation FD for FD installation to UP-5700 by connect-
ing FD.
Notice : When installing, contents of FROM Disk and PSRAM Disk is
erased.
No.
Software name
File name
3
R/J LOGO IMAGE LOADING UTILITY
(FOR Windows95)
LogoLD
Outline:
R/J logo loading utility reads the logo image file (monochrome BMP
file) and loads it against ER-01PU.
Logo image is written to Flash ROM inside ER-01PU. Loading logo
image from application is only required when changing logo image.
Function:
Loads logo image to R/J printer (ER-01PU) connected to personal
computer. Test print is also possible.
Loadable image file is monochrome bitmap file.
Image size must be smaller or equal to width 360dot (fixed) x height
160dot (variable).
Only receipt side printer can print out logo data, and print out from
journal side can not be done.
8 – 1
Summary of Contents for UP-5700
