Sharp SF-DM11, Service Manual

Page: 72 / 141

15. Place the paper.
Place the paper in the cassette.
Do not stack the paper higher than the maximum height line.
Next, push the cassette all the way into the copier.
16. Install the toner collecting container.
Reinsert the toner collecting container which was removed in step 4
into its original position, return the fixed lever to its original position,
and then close the cover.
17. Adjust any center misalignment.
Make a copy, and if there is any center misalignment such as that
shown in Fig. 1 or Fig. 2, loosen the four screws (indicated by the
arrows) which secure the front cabinet panel.
NOTE:
The mounting screws
a
and
b
will be in the symmetrical positions
when they are tightened, as shown right.
•
If misaligned as shown in Fig. 1
Move the front cabinet panel in direction A and retighten the two
mounting screws
a and then the other two screws b . Make
another copy to confirm that the center is no longer misaligned.
•
If misaligned as shown in Fig. 2
Move the front cabinet panel in direction B and retighten the two
mounting screws
a and then the other two screws b . Make
another copy to confirm that the center is no longer misaligned.
Maximum
height line
Fixed lever
Toner collecting
container
Cover
a
b
a
b
Direction A
Direction B
a
b
(Reference figure)
Fig.1
Paper center line
Center line of the first copy image
Fig.2
Paper center line
Center line of the first copy image
5 – 43