Sharp PN-80TC3, Service Manual

Page: 17 / 210

PN-L803C/80TC3 OUTLINE OF THE PRODUCTS 1 - 12
3- 2. REMOTE CONTROL UNIT
No. Function
Contents
1 Signal transmitter
2 POWER button
3
MUTE
button
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back
to the previous level.
4
VOL +/-
buttons
Pressing or displays the VOLUME menu
when the menu screen is not displayed.
Press or to adjust the volume of the sound.
* If you do not press any buttons for about 4
seconds, the VOLUME menu automatically
disappears.
* You can also change the setting by touch action.
BRIGHT
+/-
buttons
Pressing or displays the BRIGHT menu
when the menu screen is not displayed.
Press or to adjust the brightness.
* If you do not press any buttons for about 4
seconds, the BRIGHT menu automatically
disappears.
Cursor control ( / / / ) buttons
5
DISPLAY
button
Displays monitor information.
The display changes from INFORMATION1 ->
INFORMATION2 -> clear display, and so on every
time you press this button.
- The display disappears automatically after about 15
seconds.
- is displayed during LAN communication.
- If is displayed in red, there is a duplicate IP
address.
6
MODE
button
Each time you press this button, the color mode
changes in the following order:
- sRGB applies to PC input only.
sRGB is international standard of color
representation specified by IEC (International
Electrotechnical Commission). Color conversion is
made in taking account of liquid crystal’s
characteristics and represents color tone close to its
original image.
- HIGH ILLUMINANCE is a display with colors suited
to bright locations.
7
INPUT
button
The menu is displayed. Press or to select the
input mode, and press to enter.
TOUCH menu on the monitor button can change the
input mode.
- When the input mode is changed, the touch panel
connection also changes. You can set whether the
side or bottom USB port is used in each input mode.
*1 Select the terminal to be used in HDMI1 of INPUT
SELECT.
*2 Select the terminal to be used in HDMI2 of INPUT
SELECT.
*3 Select the terminal to be used in HDMI3 of INPUT
SELECT.
*4 Select the terminal to be used in D-SUB1 of
INPUT SELECT.
*5 Select the terminal for AUDIO SELECT which is
used for audio input.
Input mode Video
Audio
DisplayPort
DisplayPort input
terminal
*5
HDMI1
HDMI1 input
terminal*1
HDMI2
HDMI2 input
terminal*2
HDMI3
HDMI3 input
terminal*3
D-SUB1
D-sub1 input
terminal*4
D-SUB2
D-sub2 input terminal
8
MENU
button
Displays and turns off the menu screen.
9
ENTER
button
Confirms the setting.
10
RETURN
button
Returns to the previous screen.
11
SIZE
button
The menu is displayed.
Press or to select the screen size.