Sharp MX-B350W User Manual Download Page 5

Page: 5 / 306

1-2

BEFORE USING THE MACHINE

►

BEFORE USING THE MACHINE

PART NAMES AND FUNCTION

EXTERIOR

(1)

Output tray (exit tray cabinet)

Received faxes and printed papers are delivered to this tray.

(2)

Automatic document feeder

It automatically feeds and scans multiple originals. 2-sided
originals can be automatically scanned.

►

AUTOMATIC DOCUMENT FEEDER (page 1-30)

(3)

Operation panel

This panel hosts the [ENERGY SAVE] key/indicator, Printer
mode indicator, FAX mode indicators, and operation keys.

►

OPERATION PANEL (page 1-5)

(4)

USB port (A type)

This is used to connect a USB device such as a USB
memory device to the machine.
Supports USB 2.0 (Hi-Speed).

(5)

Bypass tray

Use this tray to feed paper manually.

When loading paper, also open the extension tray.

►

LOADING PAPER INTO THE BYPASS TRAY (page 1-24)

(6)

Handle

Grasp it when moving the machine.

(7)

Tray 1

Store paper in this tray.

►

TRAY 1 - 2 (page 1-21)

(8)

Tray 2 (when a 600-sheet paper feed unit is installed)

Store paper in this tray.

►

TRAY 1 - 2 (page 1-21)

(9)

Front cover

Open this cover to replace a toner cartridge.

►

REPLACEMENT OF TONER CARTRIDGE (page 1-36)

* Optional

BEFORE USING THE MACHINE

(1)

(5)

(2)

(3)

(4)

(7)

(6)

(8)

(9)

Summary of Contents for MX-B350W



















































































































































































































































































































Search results

Summary of Contents for MX-B350W

Reviews:

Related manuals for MX-B350W

Brands by name

Popular brands

Sharp MX-B350W, User Manual

Search results

Summary of Contents for MX-B350W

Reviews:

Related manuals for MX-B350W

Brands by name

Popular brands