Sharp MX-B350W User Manual Download Page 160

Page: 160 / 306

4-35

Press the [OK] key and press the [START] key.

• Scanning begins.
• If you are scanning from the document glass and have another page to scan, change pages and press the [START]

key. Repeat until all pages have been scanned and then press the [READ END] key.

Make sure that the reception mode is set to auto reception. (

Setting the

reception mode (page 4-27)

)

Transmission begins when the other machine calls and polls your machine.

To cancel scanning

To cancel scanning of a document while scanning is in progress, press the [CA] key. To erase the documents in the
Public Box, follow the procedure in

Deleting documents from the polling memory (page 4-36)

Summary of Contents for MX-B350W



















































































































































































































































































































Search results

Summary of Contents for MX-B350W

Reviews:

Related manuals for MX-B350W

Brands by name

Popular brands

Sharp MX-B350W, User Manual

Search results

Summary of Contents for MX-B350W

Reviews:

Related manuals for MX-B350W

Brands by name

Popular brands