manualshive.com logo in svg

Sharp MX-B350W, User Manual

The Sharp MX-B350W is a versatile multifunctional printer designed for small office environments. With its user-friendly interface and advanced features, this product offers outstanding performance. Discover its full potential by downloading the free user manual from our website, manualshive.com, to easily access all the necessary information and instructions.

Share
Download
background image

SOFTWARE LICENSE

PLEASE READ THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE. BY USING THE SOFTWARE, 
YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE.

1. License

The application, demonstration, system and other software accompanying this License, whether on disk, in read only 
memory, or on any other media (the "Software") and related documentation are licensed to you by SHARP. You own 
the disk on which the Software is recorded but SHARP and/or SHARP's Licensors retain title to the Software and 
related documentation. This License allows you to use the Software on one or more computers connected to a single 
printer and make one copy of the Software in machine-readable form for backup purposes only. You must reproduce 
on such copy the SHARP copyright notice, the copyright notice of SHARP’s Licensors and any other proprietary 
legends of SHARP and/or its Licensors that were on the original copy of the Software. You may also transfer all your 
license rights in the Software, the backup copy of the Software, the related documentation and a copy of this License 
to another party, provided the other party reads and agrees to the terms and conditions of this License.

2.  Restrictions 

The Software contains copyrighted material, trade secrets and other proprietary material which is owned by SHARP 
and/or its Licensors and in order to protect them you may not decompile, reverse engineer, disassemble or otherwise 
reduce the Software to a human-perceivable form. You may not modify, network, rent, lease, loan, distribute or create 
derivative works based upon the Software in whole or in part. You may not electronically transmit the Software from 
one computer to another or over a network.

3. Termination

This license is effective until terminated. You may terminate this License at any time by destroying the Software and 
related documentation and all copies thereof. This License will terminate immediately without notice from SHARP 
and/or SHARP’s Licensors if you fail to comply with any provision of this License. Upon termination you must destroy 
the Software and related documentation and all copies thereof.

4. Export Law Assurances

You agree and certify that neither the Software nor any other technical data received from SHARP, nor the direct 
product thereof, will be exported outside the United States except as authorized and as permitted by the laws and 
regulations of the United States. If the Software has been rightfully obtained by you outside of the United States, you 
agree that you will not re-export the Software nor any other technical data received from SHARP, nor the direct 
product thereof, except as permitted by the laws and regulations of the United states and the laws and the regulation 
of the jurisdiction in which you obtained the Software.

5. Government End Users

If you are acquiring the Software on behalf of any unit or agency of the United States Government, the following 
provisions apply. The Government agrees: 

(i) if the Software is supplied to the Department of Defense (DoD), the Software is classified as "Commercial 

Computer Software" and the Government is acquiring only "restricted rights" in the Software and its 
documentation as that term is defined in Clause 252.227-7013 (c)(1) (Oct., 1988) of the DFARS; and

(ii) if the Software is supplied to any unit or agency of the United States Government other than DoD, the Software is 

classified as "Commercial" that term is defined at 48 C.F.R. 2.101 and as "Commercial Computer Software" that 
term is defined in 48 C.F.R. 12.212, and the Government's rights in the Software and its documentation will be as 
defined in Clause 52.227-19 (c)(2) of the FAR or, in the case of NASA, in Clause 18-52.227-86 (d) of the NASA 
Supplement to the FAR.

 

Summary of Contents for MX-B350W



















































































































































































































































































































Reviews:

No comments

Related manuals for MX-B350W

NEC 870 - SuperScript B/W Laser Printer Network User'S Manual preview
870 - SuperScript B/W Laser Printer
Brand: NEC Pages: 52
NEC SuperScript 1800 Quick Start Manual preview
SuperScript 1800
Brand: NEC Pages: 8
OKIDATA DOC-IT Series Fast Start preview
DOC-IT Series
Brand: OKIDATA Pages: 13
DataSouth Documax A6300 Series User Manual preview
Documax A6300 Series
Brand: DataSouth Pages: 180
HPRT HM-A300S Quick Start Manual preview
HM-A300S
Brand: HPRT Pages: 2
Konica Minolta AccurioPrint 2100 Shortcut Manual preview
AccurioPrint 2100
Brand: Konica Minolta Pages: 32
Oce Arizona 180 GL User Manual preview
Arizona 180 GL
Brand: Oce Pages: 268
Citizen CT-S4000DCL User Manual preview
CT-S4000DCL
Brand: Citizen Pages: 4
Tally T8024 User Manual preview
T8024
Brand: Tally Pages: 266
Kyocera Mita 1900N - B/W Laser Printer Operation Manual preview
1900N - B/W Laser Printer
Brand: Kyocera Mita Pages: 286
Kodak ESP Office 6100 Series Extended User Manual preview
ESP Office 6100 Series
Brand: Kodak Pages: 94
Kashino Technology CSN-A1K User Manual preview
CSN-A1K
Brand: Kashino Technology Pages: 72
Konica Minolta BIZHUB C3351 Quick Start Manual preview
BIZHUB C3351
Brand: Konica Minolta Pages: 102
Compaq PrintNet 5525B User Manual preview
PrintNet 5525B
Brand: Compaq Pages: 238
Xerox VersaLink B625 User Manual preview
VersaLink B625
Brand: Xerox Pages: 342
Canon Pixma iP2820 Getting Started preview
Pixma iP2820
Brand: Canon Pages: 2
Canon PIXMA IP2500 Series Quick Start Manual preview
PIXMA IP2500 Series
Brand: Canon Pages: 2
Canon PIXMA iP2810 Online Manual preview
PIXMA iP2810
Brand: Canon Pages: 246

Brands by name

Popular brands

Load more brands