manualshive.com logo in svg

Sharp MX-B350W, User Manual

The Sharp MX-B350W is a versatile multifunctional printer designed for small office environments. With its user-friendly interface and advanced features, this product offers outstanding performance. Discover its full potential by downloading the free user manual from our website, manualshive.com, to easily access all the necessary information and instructions.

Share
Download
background image

4-15

FACSIMILE

►

BASIC TRANSMISSION METHODS

Transmission settings (memory transmission mode and direct 
transmission mode)

Transmission modes include memory transmission, where the original is temporarily scanned into memory before 
transmission, and direct transmission, where the original is transmitted directly without being scanned into memory.
There are two types of memory transmission: 

Storing transmission jobs (memory transmission) (page 4-17)

, where all 

pages of the original are scanned into memory before transmission begins, and 

Quick On-line (page 4-17)

, where the 

destination is dialed after the first page is scanned and the remaining pages are transmitted as they are scanned.
During a memory transmission, it may happen that the memory becomes full while the originals are being scanned.
See 

If the memory becomes full during transmission of a stored transmission job (page 4-17)

, and see 

If the memory 

becomes full during a quick online transmission (page 4-17)

If there are too many pages and memory transmission is not possible, you can press the [COMM. SETTING] key to 
switch from memory transmission to direct transmission. When direct transmission is used, transmission begins after the 
current job is completed, allowing you to give priority to a transmission job. As such, direct transmission is a convenient 
means of performing an interrupt transmission when there are a large number of stored transmission jobs.
To switch between memory transmission and direct transmission, see the following "

Faxing by direct transmission

".

Faxing by direct transmission

When transmission is performed manually using an extension phone connected to the machine or using on-hook dialing, 
direct transmission is automatically selected. (Memory transmission is not possible.)

1

Press the [COMM.SETTING] key

.

The communication settings screen appears.

2

Select "TX" with the [ ] or [ ] key.

The communication settings screen can also be displayed from the function selection screen.
Press the [SPECIAL FUNCTION] key

 

to display the special function selection screen, select "Comm. Setting" with the 

[

] or [

] key, and press the [OK] key.

3

Select "Direct TX" with the [ ] or [ ] key and press the 
[OK] key.

4

Dial the fax number and press the [START] key.

When using the document glass, multiple original pages cannot be transmitted in a single transmission.

• To change from "Direct Transmission" back to "Memory Transmission", select "Memory TX" in step 3.
• To cancel a direct transmission, press the [C] key.

Summary of Contents for MX-B350W



















































































































































































































































































































Reviews:

No comments

Related manuals for MX-B350W

Oce COLOR SYSTEM 110 Operator'S Manual preview
COLOR SYSTEM 110
Brand: Oce Pages: 392
Varitronics VariQuest Perfecta 2400STP User Manual preview
VariQuest Perfecta 2400STP
Brand: Varitronics Pages: 227
Olivetti d-Color P221 Operation Manual preview
d-Color P221
Brand: Olivetti Pages: 78
Xerox DocuPrint C3300 DX User Manual preview
DocuPrint C3300 DX
Brand: Xerox Pages: 200
Konica Minolta bizhub 215 Installation Manual preview
bizhub 215
Brand: Konica Minolta Pages: 8
Savin 4035e Copy Reference Manual preview
4035e
Brand: Savin Pages: 132
Kyocera KM-C2525E Service Manual preview
KM-C2525E
Brand: Kyocera Pages: 12
Konica Minolta Bizhub C20P Quick Manual preview
Bizhub C20P
Brand: Konica Minolta Pages: 46
Pantum P3020 Series User Manual preview
P3020 Series
Brand: Pantum Pages: 95
TVS electronics CHAMPION MSP 450 User Manual preview
CHAMPION MSP 450
Brand: TVS electronics Pages: 92
Canon PIXMA TS6000 Series Manual preview
PIXMA TS6000 Series
Brand: Canon Pages: 447
Canon PIXMA MX472 Installing preview
PIXMA MX472
Brand: Canon Pages: 8
DataCard SD Series User Manual preview
SD Series
Brand: DataCard Pages: 106
Epson EPL-6100L Reference Manual preview
EPL-6100L
Brand: Epson Pages: 190
Epson EPL-6200 Service Manual preview
EPL-6200
Brand: Epson Pages: 204
Epson EPL-6200 Network Manual preview
EPL-6200
Brand: Epson Pages: 180
Epson EPL-6100 Reference Manual preview
EPL-6100
Brand: Epson Pages: 277
Epson EPL-7000 User Manual preview
EPL-7000
Brand: Epson Pages: 330

Brands by name

Popular brands

Load more brands