4-59
ERRORXXXXXX
Line conditions prevented the transmission from taking place normally.
A code used by service technicians appears.
XX-XX OK
When group dialing or broadcast transmission was performed,
xxx- : Indicates total number of transmissions.
xxx OK: Indicates completed transmissions.
Reception result
Explanation
OK
Reception was completed successfully
P. FAIL
The power was turned off or a power failure occurred.
MEMORY FULL
The image memory became full during substitute reception to memory.
LENGTH OVER
The transmitted document was over 800 mm long and therefore could not be received.
NO RX ROLL
When polling was attempted,
Your fax number (sender's number) was not programmed in your machine.
Your fax number was not programmed as a polling passcode number in the other machine.
RX NO POLL
When polling was attempted,
The other machine did not have a polling function.
The other machine did not have a document stored in polling memory.
ERRORXXXXXX
Line conditions prevented the reception from taking place normally.
A code used by service technicians appears.
XX-XX OK
When serial polling ended normally,
xxx- : Indicates total number of transmissions.
xxx OK: Indicates completed transmissions.
JUNK FAX ERR
Fax reception was denied by the reception denial function.
Sending result
Explanation
First two digits
Last four digits
First two digits
Last four digits
Summary of Contents for MX-B350W
Page 306: ...2018D US1 ...
