manualshive.com logo in svg

Sharp MX-B350W, User Manual

The Sharp MX-B350W is a versatile multifunctional printer designed for small office environments. With its user-friendly interface and advanced features, this product offers outstanding performance. Discover its full potential by downloading the free user manual from our website, manualshive.com, to easily access all the necessary information and instructions.

Share
Download
background image

7-20

SYSTEM SETTINGS

►

SYSTEM SETTINGS

Sending Function

These settings are used to change the default settings 
(initially set at the factory) for the various fax 
transmission functions to settings that better meet your 
needs.
Select the [Sending Function] to configure the settings.

Orig. Size Enter

Set the size of originals scanned on the document glass. 
Normally 8-1/2" x 11" is set.

Set Res. Con.

This setting is used to adjust the resolution and the 
exposure level when scanning an original to be faxed. 
The initial setting is standard resolution and auto 
exposure mode.

Send Mode

This setting is used to select whether the default mode 
for sending faxes is memory transmission or direct 
transmission. 
The initial setting is "Memory TX".

Quick On Line TX

This setting is used to select whether or not quick on-line 
transmission (transmission while original pages are 
being scanned into memory) takes place when a 
memory transmission is performed.
If quick on-line transmission is disabled, transmission 
will not begin until all original pages have been scanned 
into memory.
Normally quick on-line transmission is enabled.
When this function is disabled, transmission will not 
begin until all pages of the document have been 
scanned. Note that this setting does not apply to manual 
transmission. (See 

Storing transmission jobs (memory 

transmission) (page 4-17)

.)

• Quick on-line is enabled and a checkmark appears in 

the checkbox.

• If this procedure is performed when quick on-line is 

enabled, the checkmark will be cleared and quick 
on-line disabled.

Print Station # In Rcvd Data

This setting lets you select the position (inside or outside 
the original image) of the date and sender's information 
that are printed at the top of each fax page you send. 
Normally outside the original image is selected. To have 
your name and number printed inside the original image, 
select "In Data".
For more detailed information on the position of each 
setting, see 

INCLUDING SENDER INFORMATION ON 

FAXES (OWN NUMBER SENDING) (page 4-46)

.

Address Review

You can specify whether a screen appears for 
confirmation of the destination when sending a fax.

Recall Setting (Busy)

This setting is used to set the number of recall attempts 
and the interval between recall attempts when a 
transmission is not successful due to the line being busy 
or other reason.
Normally the machine is set to make 2 recall attempts at 
intervals of 3 minutes.
If you do not wish to have recalling take place, set the 
number of attempts to "0".

Recall Set (Err)

When sending a fax, this setting is used to select 
whether or not the machine will automatically re-attempt 
the call if the transmission fails due to a line error. 
Normally the machine is set to make 1 recall attempt at 
intervals of 3 minutes.
If you do not wish to have recalling take place, set the 
number of attempts to "0".

Ring Timeout In Auto TX

When sending a fax by automatic transmission (see 

Storing transmission jobs (memory transmission) (page 
4-17)

), this setting lets you select the amount of time that 

the machine waits before breaking the connection when 
the other machine does not answer your machine's call. 
If the other machine does not respond within this set 
time, your machine will automatically break the 
connection.
Time selections are "30 sec.", "45 sec." and "60 sec.".
Normally "45 sec." is selected.

When the "Only apply to direct entry" checkbox is 
selected, the Address Review screen only appears 
when the fax number is entered with the numeric keys 
or the [REDIAL] key.

Even if this setting is enabled, the machine will not 
re-attempt the call when a fax is sent by manual 
transmission.

• If the recall interval is set to "0", the machine will 

immediately call again after the connection is 
broken due to the line error.

• Even if this setting is enabled, the machine will not 

re-attempt the call when a fax is sent by manual 
transmission.

Summary of Contents for MX-B350W



















































































































































































































































































































Reviews:

No comments

Related manuals for MX-B350W

Xerox Phaser 7300 Maintenance Manual preview
Phaser 7300
Brand: Xerox Pages: 11
Xerox Phaser 6200 Setup Manual preview
Phaser 6200
Brand: Xerox Pages: 30
Xerox Versant 4100 Press Quick Start Manual preview
Versant 4100 Press
Brand: Xerox Pages: 68
Xerox Phaser 860 Brochure & Specs preview
Phaser 860
Brand: Xerox Pages: 4
Xerox Phaser 7300B Brochure & Specs preview
Phaser 7300B
Brand: Xerox Pages: 4
Xerox Versant 2100 Press Quick Start Manual preview
Versant 2100 Press
Brand: Xerox Pages: 68
Oki C3000 Series Manual preview
C3000 Series
Brand: Oki Pages: 62
TallyGenicom LA800 User Manual preview
LA800
Brand: TallyGenicom Pages: 144
Xerox Phaser 6250DP Setup Manual preview
Phaser 6250DP
Brand: Xerox Pages: 2
Xerox Phaser 6280N Evaluator Manual preview
Phaser 6280N
Brand: Xerox Pages: 16
Panasonic KX-MC6040 - Color Laser Multi-Function... Quick Reference Manual preview
KX-MC6040 - Color Laser Multi-Function...
Brand: Panasonic Pages: 24
Avery Dennison TrafficJet Manual preview
TrafficJet
Brand: Avery Dennison Pages: 13
Oki ES5460 User Manual preview
ES5460
Brand: Oki Pages: 128
Oki B721 User Manual preview
B721
Brand: Oki Pages: 156
Swift STP512B User Manual preview
STP512B
Brand: Swift Pages: 14
Riso RP3100AW User Manual preview
RP3100AW
Brand: Riso Pages: 208
Nehoc TCA3-SP User Manual – Operating Manual preview
TCA3-SP
Brand: Nehoc Pages: 9
idp SMART-70 User Manual preview
SMART-70
Brand: idp Pages: 48

Brands by name

Popular brands

Load more brands