Sharp MX-B350W User Manual Download Page 147

Page: 147 / 306

4-22

FACSIMILE

►

BASIC TRANSMISSION METHODS

• If you do not wish to cancel the transmission, press the [

] or [

] key in the screen of step 3, select "No", and press the

[OK] key.

• You can check canceled operations in the Activity Report. "Cancel" will appear in the "Type/Note" column of the report.

Additional information on the display during transmission.

(A) Destination name

The name of the destination appears if programmed.

(B) Transmission method name

In the case of a timer transmission, the timer icon "

" appears at the beginning of the transmission method name.

The document number assigned at the time of scanning in memory transmission mode appears.

(A)

(B)

(C)

(D)

Summary of Contents for MX-B350W



















































































































































































































































































































Search results

Summary of Contents for MX-B350W

Reviews:

Related manuals for MX-B350W

Brands by name

Popular brands

Sharp MX-B350W, User Manual

Search results

Summary of Contents for MX-B350W

Reviews:

Related manuals for MX-B350W

Brands by name

Popular brands