Sharp MX-7090N User Manual Download Page 9

Page: 9 / 789

1-6

BEFORE USING THE MACHINE

►

BEFORE USING THE MACHINE

INTERIOR

(1)

Toner cartridge

This cartridge contains toner.
When the toner in a cartridge runs out, the cartridge of
the color that ran out must be replaced.

►

REPLACEMENT OF TONER CARTRIDGE (page
1-151)

(2)

Fusing unit

Heat is applied here to fuse the transferred image onto
the paper.

(3)

Right side cover

Open this cover to remove a misfeed.

(4)

Paper reversing section cover

This unit is used for reversing paper when 2-sided printing
is performed. Open this cover to remove a paper misfeed.

(5)

The main power switch

Use this switch to turn on the power for the machine.

►

TURNING ON THE POWER (page 1-10)

(6)

Waste toner bottle

This bottle collects excess toner that is produced during
printing.

►

REPLACING THE WASTE TONER BOTTLE (page
1-154)

(7)

Transfer belt

This belt takes the image formed with toner off the
photoconductive unit and transfers the image onto paper.

(8)

Right side cover release lever

To remove a paper misfeed, pull and hold this lever up to
open the right side cover.

(1)

(2)

(3)

(5)

(6)

(8)

(7)

(4)

The fusing unit is hot. Take care not to burn yourself
when removing a misfeed.

A service technician collects replaced waste toner
bottles.

Do not touch or damage the transfer belt.
This may cause a defective image.

Summary of Contents for MX-7090N






















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-7090N

Reviews:

Related manuals for MX-7090N

Brands by name

Popular brands

Sharp MX-7090N, User Manual

Search results

Summary of Contents for MX-7090N

Reviews:

Related manuals for MX-7090N

Brands by name

Popular brands