Sharp MX-7090N, User Manual

Page: 677 / 789

7-80
SYSTEM SETTINGS ► SYSTEM SETTINGS
Initial Status Settings
The following settings are related to copying.
Initial Status Settings selected with these settings apply to all functions of the machine (not just the copy function).
The copier settings are reset to the initial state when the [Power] button is turned on, when the [CA] key is tapped, or
when the auto clear interval has elapsed. These settings are used to change the default settings for copy mode.
The following settings can be changed:
Text /Image Printing
Text Settings (Stamp)
You can add fixed text used in the [Stamp] in [Others] of copying.
Custom Stamp
You can set an image to be used in [Custom Stamp] in [Custom Image] of [Others] for copying.
Custom Watermark
You can set an image to be used in [Custom Watermark] in [Custom Image] of [Others] for copying.
Item Description
Color Mode Configure default color mode settings.
Image Orientation Specify the original orientation.
Paper Tray Specify the paper tray that is selected by default.
Exposure Type Configure default exposure mode settings.
Copy Ratio Specify the copy ratio that is selected by default.
2-Sided Copy
Configure the 2-sided mode settings that are selected by default.
If this setting is used to change the default setting for the duplex function to any setting
other than "1-Side to 1-Side" and the duplex function or automatic document feeder fails or
is disabled, the setting will revert to "1-Side to 1-Side".
Original Binding Set the original binding in 2-Sided copy.
Output Binding Set the output binding in 2-Sided copy.
Output Set the print output method and output tray that are selected by default.
Output Tray Specify the output tray.
Offset Set whether or not offset is performed in the default settings.
Separator Page
Separator pages can be inserted before or after jobs. Set the paper tray used for the
separator pages.
Staple Sort / Staple Position Configure staple and staple position settings.
Punch Configure punch settings.
Fold Configure fold settings.
Saddle Fold Configure saddle fold settings.
Paper Size for Z-Fold Sets the default paper size for Z-fold function.
C-Fold Configure C-fold settings.
Accordion Fold Configure accordion fold settings.
Double Fold Configure double fold settings.
Half Fold Configure half fold settings.
Trimming Width Settings Sets the default trimming width for trimmer function.
Factory defaults This returns all items to the factory default settings.