Sharp MX-7090N User Manual Download Page 158

Page: 158 / 789

1-155

REPLACING THE STAMP CARTRIDGE

If a stamp unit (AR-SU1) is installed on the automatic document feeder and the stamp has become light, replace the
stamp cartridge (AR-SV1).

Supplies

Stamp cartridge (2 in package) AR-SV1

Open the automatic document feeder.

Remove the document backplate sheet
from the automatic document feeder.

Remove the sheet slowly. Place the removed sheet with the
side that was attached face up on the document glass.

Grasp the tab on the stamp unit and
pull the unit out.

Remove the stamp cartridge (A).

Install a new stamp cartridge.

(A)

Summary of Contents for MX-7090N






















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-7090N

Reviews:

Sharp MX-7090N, User Manual, Page: 158 / 789

Search results

Summary of Contents for MX-7090N

Reviews: