manualshive.com logo in svg

Sharp MX-7090N, User Manual, Page: 154 / 789

Share
Download
Sharp MX-7090N User Manual Download Page 154

1-151

BEFORE USING THE MACHINE

►

MAINTENANCE

REPLACEMENT OF TONER CARTRIDGE

As a rule, toner cartridges should be replaced after the message "Change the toner cartridge." appears.
You should keep one set of replacement toner cartridge on hand so that you can preplace a toner cartridge immediately 
when toner runs out. 

Replacement message

When this message appears, prepare a toner cartridge for replacement. 
"(

□□□□

)" indicates the color of toner cartridge that must be readed. 

Y:Yellow toner, M:Magenta toner, C:Cyan toner, and Bk:Black toner

If you continue printing, the following message appears. 
Colors that have run out of toner are indicated in (

□□□□

). 

When this message appears, replace a toner cartridge for replacement.
In this state, printing is possible.

If you continue to use the machine, the following message will appear when the toner runs out.
Colors that have run out of toner are indicated in (

□□□□

).

Replace the toner cartridge with a one of the relevant color.

Empty toner cartridge can be replaced without interrupting a copy/print job.

Toner Low. (□□□□)(Do not replace
cartridge until requested.)

Change the toner cartridge.
(□□□□)

OK

Ready to scan for copy.
(□□□□ Change the toner supply.)

Change the toner cartridge.
(□□□□)

Summary of Contents for MX-7090N






















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments