Sharp DX-C311 - Color - All-in-One Operation Manual Download Page 41

Page: 41 / 699

1-2

BEFORE USING THE MACHINE

Contents

This section provides basic information about the machine. Please read this chapter before using the machine.

PART NAMES AND FUNCTIONS

EXTERIOR

(1)

Automatic document feeder

This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.

☞

PLACING THE ORIGINAL

(page 1-36)

(2)

Front cover

Open this cover to replace a toner cartridge.

☞

Maintenance & Safety Guide

(3)

Operation panel

This is used to select functions and enter the number of
copies.

☞

OPERATION PANEL

(page 1-7)

(4)

Output tray (center tray)

Output is delivered to this tray.

(5)

Finisher*

This can be used to staple output.

☞

FINISHER

(page 1-41)

(6)

Main power switch

This is used to power on the machine.
When using the fax or Internet fax functions, keep this
switch in the "on" position.

☞

TURNING THE POWER ON AND OFF

(page 1-14)

(7)

Handle

Grasp it when moving the machine.

(8)

Bypass tray

Use this tray to feed paper manually.
When loading paper larger than 8-1/2" x 11" or A4, be
sure to pull out the bypass tray extension.

☞

LOADING PAPER IN THE BYPASS TRAY

(page 1-33)

* Peripheral device.

BEFORE USING THE MACHINE

(1)

(2)

(4)

(3)

(5)

(6)

(7)

(8)

When a finisher is installed

Caution

The main unit is extremely heavy, and thus
two people are required to do the work. When
lifting the main unit, grasp the handles on
each side firm

Summary of Contents for DX-C311 - Color - All-in-One




























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DX-C311 - Color - All-in-One

Reviews:

Related manuals for DX-C311 - Color - All-in-One

Brands by name

Popular brands

Sharp DX-C311 - Color - All-in-One, Operation Manual

Search results

Summary of Contents for DX-C311 - Color - All-in-One

Reviews:

Related manuals for DX-C311 - Color - All-in-One

Brands by name

Popular brands