manualshive.com logo in svg

Sharp DV-RW270S, Operation Manual, Page: 63 / 92

Share
Download
Sharp DV-RW270S Operation Manual Download Page 63

61

GB

Stereo recording and playback

NOTE:

When playing Hi-Fi cassette tapes recorded on another VCR, the
sound output may be distorted. This is not a malfunction of the
unit. Try to minimise sound distortions by using 

TRK (TRACK-

ING) +/–

 or change to MONO by pressing 

AUDIO/AUDIO SE-

LECT

.

Bilingual playback
performed as follows:

On screen indications
(for 4 sec.)

Stereo playback
performed in:

Simultaneously,
both languages
from HiFi track
(Mixed sounds)

Original sound
track (Sub sound)

Secondary sound
track
(Main sound)

Secondary sound
track
(Main sound)

Stereo

Mono

Right channel
signal output from
both loudspeakers

Left channel signal
output from both
loudspeakers

L CH

HI-FI

R CH

HI-FI

MONO

STEREO

HI-FI

NICAM OFF

NICAM M1/2

NICAM M1

NICAM ST

NICAM programmes are divided
into 4 types as shown below.

NICAM STEREO
broadcast

“NICAM ST” is dis-
played when a
NICAM STEREO
broadcast signal is
received.

NICAM MONO A
broadcast

“NICAM M1” is dis-
played when a
NICAM MONO A
broadcast signal is
received.

NICAM MONO A B
broadcast

“NICAM M1/2” is
displayed when a
NICAM MONO A
and MONO B
broadcast signal is
received.

NICAM OFF

This will be dis-
played if a NICAM
signal is received
when “NICAM OFF”
is selected in the AV
SETUP MENU.

This VCR/DVD is capable of recording
sound from a Hi-Fi system. The
recording will be performed
automatically. NICAM STEREO broad-
casts are recorded in its original sound
system regardless of the setting. If you
wish to record NICAM programmes,
select NICAM “AUTOMATIC” at “NICAM” 

-

setting on page 25.
The VCR/DVD can also receive and
record German A2 stereo program. The
tape recording is always both in HiFi and
in MONO on the standard longitudinal
track. If you record bilingual TV
programs, the two audio channels will
always be recorded (only for tape or
DVD-RW VR recording).

S T E R E O

BILINGUAL

German A2 stereo sound reception:

Stereo program indication

It will be displayed for approx. 4
seconds when stereo programs
are being received.

Bilingual program indica-
tion

It will be displayed for approx.
4 seconds when bilingual pro-
grams are being received.

Playback

Use 

AUDIO/AUDIO SELECT 

to select stereo/mono or bilingual

playback. See the table below for more information.

Output selection for DVD

You can only switch between the left or right channel and
stereo when playing a disc on which a bilingual broadcast was
recorded in DVD-RW VR mode. It is not possible to switch
between channels as only the channel selected in the setting
of NICAM (AUTOMATIC or OFF) is recorded in DVD-RW or
DVD-R Video mode (see page 25).

NOTE:

The sound indications of STEREO/BILINGUAL/etc. are dis-
played automatically for about 4 seconds on the TV screen in the
VCR mode. In the DVD mode they cannot be displayed, so
please press 

DISPLAY

 to check the sound indications.

Summary of Contents for DV-RW270S





























































































Reviews:

No comments