27
GB
Setting the channel
This VCR/DVD has a built-in tuner to receive TV
broadcast transmissions. Before you record a TV-
Broadcast, you must set and preset all available
channels. This VCR/DVD can preset up to 80 chan-
nels.
Preparation:
• Turn ON the TV and switch the TV to it’s AV channel
(this may be labelled EXT / AUX etc.)
• Select “
CHANNEL SETUP
”. For the procedure, see
steps
1
to
3
in “Using the SETUP MENU” on page
18.
Automatic station presetting
Select “AUTO TUNING” and press
ENTER
.
The VCR/DVD will begin searching and storing all the
broadcasting channels available in your area. While this
is happening, “AUTO TUNING” will be shown on the
screen. When the automatic tuning process is complete,
the picture of preset TV channel at CH1 will appear on
the screen.
NOTES:
• TV reception interference or power failure may result
in Automatic station presetting malfunctions. In such
a case repeat the automatic presetting procedure.
If the automatic tuning procedure does not receive
some stations correctly, you can preset the stations
manually (See page 28).
• When the unit is in AV1, AV2 or AV3, you cannot se-
lect “CHANNEL SETUP”. Set the unit in any channel
position to select “CHANNEL SETUP”.
To skip a channel position
You can skip unwanted channels not to be called up by
pressing
CH
M
M
M
M
M
/
?
?
?
?
?
.
Example: Skip the channel position 29.
1
Select “CH TUNING” and press
ENTER
.
2
Select “CH” and press
ENTER
. Then select the
skipping channel position number (29) by pressing
CH
M
M
M
M
M
/
?
?
?
?
?
and press
ENTER
.
3
Select “SKIP” and press
ENTER
.
4
Select “ON” and press
ENTER
. Now this channel
position is skipped.
NOTE:
To cancel skipping, select “OFF” at step
4
above.
CH
29
SKIP
OFF
DECODER
OFF
CH
29
SKIP
OFF
DECODER
OFF
DECODER ON/OFF
You can set the DECODER setting for each channel
position.
Example: Set the channel position 5 as decoder on.
1
Select “CH TUNING” and press
ENTER
.
CH
5
SKIP
OFF
DECODER
OFF
2
Select “CH” and press
ENTER
. Then select the
desired channel position number (5) by pressing
CH
M
M
M
M
M
/
?
?
?
?
?
and press
ENTER
.
3
Select “DECODER” and press
ENTER
.
4
Select “ON” and press
ENTER
. Now this channel
position was set as decoder on.
NOTE:
To set to decoder off, select “OFF” at step
4
above.
CH
5
SKIP
OFF
DECODER
OFF
CH
1
SKIP
OFF
DECODER
OFF
CH
1
SKIP
OFF
DECODER
OFF
