Sharp DV-RW270S Operation Manual Download Page 34

Page: 34 / 92

Special playback

Fast forward playback

Press

SEARCH

during normal playback.

Each press of

SEARCH

will increase the speed of the search

(x1.5),

(x12),

(x24),

(x60).

The speed of the search has only 2 steps (x6, x16) on a CD.

• To resume normal playback, press

PLAY

Reverse playback

Press

SEARCH

during normal playback.

Each press of

SEARCH

will increase the speed of the search

(x3),

(x12),

(x24),

(x60).

The speed of the search has only 2 steps (x6, x16) on a CD.

• To resume normal playback, press

PLAY

Still playback

Press

PAUSE/STILL

during normal playback.

• To resume normal playback, press

PLAY

Frame advance

Press

PAUSE/STILL

during still play-

back.
One frame is advanced each time you
press

PAUSE/STILL

• To resume normal playback, press

PLAY

Slow motion playback

Press

SLOW

during normal playback or

still playback.
Each press of

SLOW

will change the speed of the slow “

1/2”,

“

1/4”, “

1/8”.

• To resume normal playback, press

PLAY

• To resume the still playback, press

PAUSE/STILL

Locating a chapter or track

Press

SKIP

during playback to locate a chapter that

you want to watch.
Each time you press the button, a chapter or track is skipped.
• When you press

SKIP

once, playback starts from the begin-

ning of the current chapter or track. If you want to play the preceding
chapter or track, press

SKIP

twice in quick successions.

TV/VIDEO

NOTE: There may be a slight de-
lay between pressing the button
and the function activation.

NOTES:

• The unit is capable of holding a still video image or On screen display image on your television screen indefi-

nitely. If you leave the still video image or On screen display image displayed on your TV for an extended period
of time, you risk permanent damage to your television screen. Projection televisions are very susceptible.

• Fast forward and reverse playback does not work with a MP3/WMA/JPEG-CD.
• Frame advance and slow motion does not work with a CD.

Summary of Contents for DV-RW270S





























































































Search results

Summary of Contents for DV-RW270S

Reviews:

Related manuals for DV-RW270S

Brands by name

Popular brands

Sharp DV-RW270S, Operation Manual

Search results

Summary of Contents for DV-RW270S

Reviews:

Related manuals for DV-RW270S

Brands by name

Popular brands