21
GB
You can format, protect, or finalise a disc.
Preparation:
• Turn ON the TV and switch the TV to it’s AV channel
(this may be labelled EXT / AUX etc.)
• Select “
DISC SETUP
” from “
SYSTEM SETUP
”. For
the procedure, see steps
1
to
3
in “Using the SETUP
MENU” on page 18.
REFORMAT
You can format a recorded DVD-RW.
Check the content of the disc before format. If you for-
mat the disc, the recorded content of the disc will be
erased.
To format a DVD in Video mode, select “REFORMAT
AS DVD VIDEO”, and to format it in VR mode, select
“REFORMAT AS DVD VR”.
The screen below will appear on screen.
• When you select “START” and press
ENTER
, format
will start. The screen below will appear on screen.
• When format has finished, “REFORMATTING COM-
PLETED PRESS ENTER” will appear on screen.
• When you select “CANCEL” and press
ENTER
, the
DISC SETUP screen will appear on screen.
NOTES:
• You cannot format Ver. 1.0 DVD-RW and DVD-R.
• You cannot format a disc if the disc protection is “ON”.
In such a case, ensure you cancel the disc protection
before reformat (see page 24).
• During formatting, finalising and undo finalising, the
progress will be shown by “–” in the front display
window.
Setting the clock / Setting the disc
Your VCR/DVD is fitted with a 24 hour clock.
You must set the date and time for timer record-
ings.
Preparation:
• Turn ON the TV and switch the TV to it’s AV channel
(this may be labelled EXT / AUX etc.)
• Select “
CLOCK
” from the “
SYSTEM SETUP
” section
of the SETUP MENU and press
ENTER
(For the full
procedure, see steps
1
to
3
in “Using the SETUP
MENU” on page 18).
CLOCK (DD/MM/YY)
Ex.: Setting the clock to “10:20” September, 27th, 2005.
1
Select the wanted items using
or
(day, month,
year, hour and minute), then press
ENTER
.
2
Press or to set the value of the selected item.
3
Repeat steps
1
and
2
to set the date, year and
present time, and press
ENTER
. The SETUP
MENU will close.
The clock time setting is completed.
NOTE:
In case of a power failure, the clock will continue to
operate for another 30 minutes with quartz-controlled
precision. To indicate that the power failure has lasted
for an excessive period of time “0:00” will appear on
the display. When “0:00” appears on the display, read-
just time and date.
AUTO TIME
The auto time function will automatically set the built-in
clock (day, month, year, and time) when the unit is con-
nected to an antenna and it is turned off. As the unit
searches for a receivable station in your area and it
receives a broadcast signal for auto time, the auto time
needs several minutes to set itself.
If you don’t want to use the auto time function, select
“OFF”. The default setting is “ON”
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CHANNEL SETUP
OTHER
LANGUAGE
PARENTAL
CLOCK
DISC SETUP
OTHER
CLOCK
CLOCK (DD/MM/YY)
AUTO TIME
ON
01/01/05 00:00
SETUP MENU
RETURN
SETUP
ENTER
BACK
END
SELECT
ENTER
SELECT
REFORMAT
START
CANCEL
REFORMAT