60
GB
Timer recording
12
Select “OK” and press
ENTER
. The timer program is set and
the TIMER REC SET screen appears again.
13
When you enter the other program for the timer recording, re-
peat the steps
3
to
12
.
14
Press
SETUP
. The TIMER REC SET screen disappears and
the display will return to the normal screen.
15
Press
TIMER REC
. The timer indicator “
” will appear on the
display and the unit enters standby for recording.
• If the program with “VPS/PDC” OFF is set for DVD recording
only, the unit will change to VCR mode automatically. (DVD
mode cannot be selected.)
• If the program with “VPS/PDC” OFF is set for VCR recording only,
the unit will change to DVD mode automatically. (VCR mode can-
not be selected.)
• If the programs with “VPS/PDC” OFF are set for DVD and VCR
recording, the unit will turn off. Also if the program with “VPS/
PDC” ON is set, the unit will turn off. If you want to use the unit,
press
TIMER REC
again to deactivate the timer. (You cannot
deactivate the timer about for 1 minute after the unit turned off.)
• If the clock symbol (
) blinks on the display, and “TIMER
RECORDING ERROR PLEASE CHECK THE DISC OR TAPE.”
appears on the screen even though you have pressed
TIMER
REC
, the cassette may not be loaded or no disc space is available.
• If the cassette is ejected even though you have pressed
TIMER
REC
, the erase prevention tab of the cassette may have been
removed. (See page 45.)
To extend the timer recording time
Press
TIMER REC
while it is timer recording. (You may also use nor-
mal recording or OTR).
Checking or changing the timer recording
When you want to check the selected timer recording, follow the steps
1
and
2
of “Setting timer recording” and display the TIMER REC SET screen.
To change the timer recording, select the program to be changed and
press
ENTER
. The changing method is the same as that for the re-
cording a program for the first time.
Cancelling the timer recording
Display the TIMER REC SET screen.
Select the program you want to cancel and press
CANCEL
, then the
selected program will be erased from the timer recording list.
If the Timer programs-overlap
Do not overlap timer programs as portions of the conflicting programs
will be lost. The first recording time has priority over the next recording
time as shown in the diagram below.
In this case, the next recording time is delayed for a maximum of 1 minute.
8 : 00
11 : 00
9 : 00
10 : 00
Program 1
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2
Prog.3
Program 2
Program 3
Recording
Control Settings
NOTES:
• Recording starts a few seconds
before the preset starting time.
• You cannot use the timer record-
ing for the both DVD and VCR at
the same time.
• You can playback the DVD during
the VCR timer recording, and you
can playback the VCR during the
DVD timer recording.
• If the clock symbol (
) blinks when
the timer recording ended, the TV
program has not been completely
recorded because of an insuffi-
cient capacity for DVD disc or video
tape. Press
TIMER REC
to cancel
the timer program.
• After setting the timer program with
VPS/PDC is “ON”, press
TIMER
REC
then unit will automatically
turn off.
• While timer recording is in
progress, the timer program cannot
be set, changed or cancelled. If you
need, press
TIMER REC
to cancel
the timer recording.
