Sharp DV-RW270S Operation Manual Download Page 42

Page: 42 / 92

MP3/WMA/JPEG/DivX

playback

MP3/WMA files can be played
back. Also, you can display JPEG/
DivX

files on the TV screen and

enjoy them.
Some discs may not play due to
the condition of the recording.

Limitations on MP3/WMA/
JPEG/DivX

CD playback:

• MP3/WMA/JPEG/DivX

CD is a

disc that is standardised by
ISO9660.

• The directory and file names of the

MP3/WMA/JPEG/DivX

CD must

correspond to the ISO standardised
file names.

• This unit can read 200 files per di-

rectory. If one directory has more
than 200 files, it reads up to 200 files,
the remaining files will be omitted.

• The unit is able to recognise up to

a maximum of 50 directories per
disc.

• MP3/WMA CDs cannot be used for

playback for the purpose of dupli-
cating.

• MP3/WMA/JPEG/DivX

CDs may

be used for playback, but not for re-
cording.

• If the CD has both audio tracks and

MP3/WMA/JPEG/DivX

files, only

audio tracks are played.

• It may take more than one minute

for this unit to read MP3/WMA/
JPEG/DivX

files depending on its

structure.

• Music recorded by “Joliet Record-

ing Specification” can be played
back. Long file names will be cut.

• The music files recorded by “Hier-

archical File System ” (HFS) can-
not be played.

• Some MP3/WMA/JPEG/DivX

files

are not played in the order they
were recorded.

Preparation:

• Turn ON the TV and switch the TV to it’s AV channel (this may be

labelled EXT / AUX etc.)

• Load the disc storing MP3, WMA, JPEG or DivX

• Press

DVD/VCR

to select DVD mode. (The DVD indicator will light.)

Using the BROWSER screen

Press

TITLE MENU/TOP MENU

The BROWSER screen will appear.

The MP3, WMA, JPEG and DivX

files and folders stored in the

disc are displayed on the BROWSER screen.
• Select a folder and press

ENTER

. The files in the folder appear.

When the file to be displayed is selected

You can select the file types to be displayed on the BROWSER screen.

Press

and then press

to select “SELECT FILES” and

press

ENTER

The following list will appear on screen.

MUSIC ONLY:

Only the MP3/WMA files appear.

PICTURES ONLY:

Only the JPEG files appear.

MOVIE ONLY:

Only the DivX

files appear.

ALL:

All files and folders appear.

Select one item in the above list and press

ENTER

The display will be changed to the selected display type.

PLAY

SELECT FILES

BROWSER

RETURN

ENTER

BACK

END

SELECT

TITLE

MENU

MUSIC ONLY

PICTURES ONLY

MOVIE ONLY

ALL

SET

j16_16.JPG

j17_17.JPG

j18_18.JPG

j19_19.JPG

j20_20.JPG

Grammy 03-01.mp3

Grammy 03-02.mp3

Grammy 03-03.mp3

Honey.wma

Party.divx

m_i_KISS IN THE SKY

ENTER

w_j_DISTANCE

w_m_LOVE PSYCHEDELIC

j01_1.JPG

j02_2.JPG

j03_3.JPG

j04_4.JPG

j05 _5.JPG

j06_6.JPG

j07_7.JPG

m_i_KISS IN THE SKY

BROWSER

RETURN

BACK

SET

END

SELECT

TITLE

MENU

ENTER

Summary of Contents for DV-RW270S





























































































Search results

Summary of Contents for DV-RW270S

Reviews:

Related manuals for DV-RW270S

Brands by name

Popular brands

Sharp DV-RW270S, Operation Manual

Search results

Summary of Contents for DV-RW270S

Reviews:

Related manuals for DV-RW270S

Brands by name

Popular brands