manualshive.com logo in svg

Sharp AR-C330 Key operators, Operation Manual

Share
Download
Sharp AR-C330 Key operators Operation Manual Download Page 72

3-28

CHAPTER

3

SPECIAL FUNCTIONS

  Image editing functions

Copy

Original

IMAGE EDITING FUNCTIONS

NEG./POS.  REVERSE

The NEG./POS. REVERSE function is used to copy the original image
in complementary colours. If this function is selected in the black/white
mode, the black and white areas will be reversed.
(Refer to the samples on page 2 to see the effect on copy images in
relation to the NEG./POS. REVERSE.)

●

When this function is selected, neither the COLOUR ADJUSTMENTS
nor the SINGLE COLOUR functions can be selected.

1

Place the original on the document glass or in the
optional document feeder tray.

2

Press the SPECIAL MODES key.

●

The SPECIAL MODES screen will appear.

3

Press the “IMAGE EDIT” key on the touch panel.

●

The IMAGE EDIT menu will appear.

4

Press the “NEG./POS. REVERSE” key on the touch
panel.

●

The “NEG./POS. REVERSE” key will be highlighted.

2-SIDED

COPY

SPECIAL

MODES

READY TO 

READY TO COPY. 

SPECIAL MODES

MARGIN SHIFT

ERASE

IMAGE EDIT

COVERS

CENTRING

DUAL PAGE

COPY

COLOUR

ADJUSTMENTS

TRANSPARENCY INSERTS

OK

AUTO

EXPOSURE

PAPER SELECT

100%

COPY RATIO

AUTO

A4

READY TO COPY.

SPECIAL MODES

OK

OK

NEG./POS.

REVERSE
A3

FULL-BLEED

MIRROR

IMAGE

MULTI-PAGE

ENLARGEMENT

IMAGE EDIT

SINGLE COLOUR

PHOTO REPEAT

EXTRA SIZE

Summary of Contents for AR-C330 Key operators



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands