Sharp AR-C330 Key operators, Operation Manual

Page: 150 / 186

8-4
CHAPTER
8
KEY OPERATOR PROGRAMS
A complete list of all key operator programs is provided below. These programs can
only be accessed by first entering the key operator code number.
The key operator programs are roughly divided into three groups: copier key
operator programs, printer key operator programs, and account control. Other
programs listed on page 8-6 are common programs that are not included in these
three groups.
COPIER KEY OPERATOR PROGRAMS
Category Program Name Function Page No.
Other Function Key Operator Code Changes the key operator code number. 8-9
Settings Number Change
Exposure Lightens or darkens copies in the automatic 8-9
Adjustment exposure mode.
Toner Save Mode Reduces toner consumption in black/white copying. 8-9
(B/W)
Add or Change Adds or changes reduction and enlargement preset 8-10
Extra Preset Ratios copy ratios.
Setting a Maximum Sets the maximum number of copies that can be 8-10
Number of Copies selected.
Initial Margin Shift Sets the initial margin shift values. 8-11
Setting
Erase Width Sets the initial amount of the erase area. 8-11
Adjustment
Initial Status Sets the copier’s initial settings in the ready 8-12
Setting condition.
Transfer Belt Position Switches the transfer belt to either the B/W side or 8-12
the colour side.
Initial Colour Balance Sets the initial colour balance settings. 8-13
Setting
Size Setting for Sets a paper size in each tray with [EXTRA] setting. 8-13
[EXTRA]
Require Key Prevents the copier from being started by people 8-14
Operator Code other than key operator.
Stream Feeding Enables the stream feeding mode for copying 8-15
Mode from the optional document feeder.
Override Sorter Bin Cancels limit control of operation in case of bin 8-15
Capacity Limit capacity overflow of an optional staple sorter.
Timer Settings Sleep Mode Sets a time interval after which the copier enters the 8-16
Setting sleep mode after copying is completed.
Auto Clear Setting Sets a time interval after which the copier returns 8-16
to the initial settings.
KEY OPERATOR
’S GUIDE
Key operator programs