Sharp AR-C330 Key operators, Operation Manual

Page: 172 / 186

8-26
CHAPTER
8
KEY OPERATOR PROGRAMS
ACCOUNT CONTROL
The programs of this category are used to set the internal auditor
functions. These programs can be selected by pressing the “ACCOUNT
CONTROL” key and then selecting the desired program key.
Auditing Mode
This program is used to enable or disable the basic auditing mode.
The auditing mode can be set for both the colour and black/white (B/
W) modes or for only the color mode.
When the auditing mode has been set, an assigned account number
must be entered for access.
A maximum of 400, 5-digit account numbers can be assigned. Use
key operator program “Account Number Control” (page 8-30) to
assign account numbers.
When the “AUDITING MODE” key is pressed, the following display
will appear.
KEY OPERATOR PROGRAMS
AUDITING MODE
OK
COLOUR & B/W
COPIES
PRINTS
SCAN
COLOUR ONLY
DISABLE
1. Select “COLOUR & B/W” or “COLOUR ONLY” for setting
the auditing mode.
●
A checkmark appears in each checkbox on the right-hand side
of the screen.
● If you need to disable auditing mode for a function, press its
checkbox to remove the checkmark.
●
If you wish to disable auditing mode for all functions, press the
“DISABLE” key. The checkmarks will be removed from the
checkboxes on the right and the checkboxes will be greyed out.
2. Press the “OK” key to exit the program.
KEY OPERATOR
’S GUIDE
Key operator programs