Sharp AR-C330 Key operators, Operation Manual

Page: 32 / 186

2-8
CHAPTER
2
MAKING COPIES
Using the RADF
USING THE RADF
2-sided copies from 1-sided originals
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
2
Press the 2-SIDED COPY key.
3
If the number of originals is known, use the (EVEN
NUMBER ORIGINALS) key or (ODD NUMBER
ORIGINALS) key on the touch panel, then proceed to
step 4. If the number of originals is not known, select
“PRE-COUNT” for an automatic count by the RADF and
press the COLOUR COPY START (
) key or BLACK
COPY START ( ) key.
●
The following message will appear.
PRE-COUNT MODE
NUMBER OF ORIGINALS IS **.
If the number of originals exceeds the limit, other messages will
appear.
●
When the count is complete and the number is known, replace
the originals in the document feeder tray and select “EVEN
NUMBER ORIGINALS” or “ODD NUMBER ORIGINALS” as
above.
4
Press the “OK” key.
5
Enter the desired number of copies.
● When making colour copies in the duplex mode onto B4 (8-1/2"
x 14") paper or larger, only one copy per original can be made.
Even if a multiple number of copies is set, the number will be
changed to 1 when the COLOUR COPY START (
) key is
pressed.
6
Press the COLOUR COPY START ( ) key or BLACK
COPY START ( ) key.
●
To perform colour copying, press the COLOUR COPY START
(
) key. To perform black/white copying, press the BLACK
COPY START ( ) key.
●
To cancel a copy run during duplex copying, press the CLEAR
ALL (
CA
) key.
Copy (2-sided) Originals (1-sided)
OUTPUT
2-SIDED
COPY
AUTO
Maximum height
line
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO A4
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO A4