Sharp AR-C330 Key operators, Operation Manual

Page: 110 / 186

6-2
CHAPTER
6
PART NAMES AND FUNCTIONS
Exit tray (optional)
Finished copies are deposited in the exit tray.
In some regions, the exit tray is provided as a
standard component.
Power switch
Press to turn copier power on and off.
Operation panel
All copier controls are located here for easy
operation.
Original holder (optional)
Keep originals here.
Document cover (optional)
Place the original on the document glass and close
the document cover before copying starts.
Toner collecting container cover
Open to replace the toner collecting container.
Duplex module
When duplex copying is performed, paper is
automatically reversed here.
Paper trays
Each tray holds 500 sheets of paper.
Front cover
Open to remove misfeeds and to service the
copier.
Right side covers
Open to remove misfeeds in the paper feed area.
Document glass
All originals which cannot be copied from the
optional RADF must be copied here.
Paper clip tray
Keep paper clips here.
Bypass tray paper guides
Adjust to the width of the copy paper.
Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
When feeding paper larger than A4 (8-1/2" x 11")
size, extend the tray.
GENERAL INFORMATION Part names and functions
[Optional document cover]
[Optional RADF]
Exterior